How does your new charger work for AutoBrush 4?

Updated 3 weeks ago by Marlou Quilicol

Our AutoBrush 4 was designed with ease of charging in mind. To charge your AutoBrush 4, all that you need to do is the following:

  1. The power button on your AutoBrush will turn red when it is time to charge. Once it turns red, there is one minute left of brushing time.
  2. Connect the USB cable to the wall plug and the other end to the charging base to charge. The battery life indicator on the charging base will light green when it is plugged in and safe to use. Full charges can take up to 4 hours.
  3. Place the AutoBrush body on the charging base. The battery life indicator on the AutoBrush body will blink red when charging. The battery life indicator will turn green, once the AutoBrush is fully charged. Full charges last for up to 1 week

Some Important Notes:

Keep charging base away from water at all times to avoid damage. Make sure that the AutoBrush is dry when charging, and pat dry if wet. Only keep the charging base plugged in when actually charging. When not charging, disconnect the charger cord and remove it from the charging base.
Charging base voltage is 5V. Please avoid anything higher to prevent overheating or burnout. Please charge at room temperature to avoid overheating of the charging unit. Store in a dry and cool place and avoid sunlight if possible.
Charge product if left unused for long periods of time. It is recommended to charge the product at least once every 3 months to prevent malfunction. Keep the charging base plugged in for no more than 4 hours at any given time to avoid damage.


How did we do?


Powered by HelpDocs (opens in a new tab)